Your Vehicle
Seat Altea FreeTrack 2.0 TDI 170hp
Technical Specifications
Power and torque increase
Stage 1: software remap only, no mechanical changes, fully reversible. Stage 2: remap combined with downpipe / sports air filter.
Stage 1: 449 € all inclusive, VAT included (via the OBD port). Lock the price with a 122 € deposit Book now Stage 2: 122 € deposit online; the rest (ECU writing, mechanical work, parts) quoted by the centre, which calls you the same day Pay the deposit
Power HP
Torque Nm
Stage 1 all inclusive: lock the price with a deposit
449 € all inclusive, VAT included: tailor-made file and installation at the centre (via the OBD port) · network price, the workshop may charge less
Lock the price with a 122 € deposit, deducted from the total. The balance, 327 €, is paid at the centre when the job is done.
Price locked for 30 days; the deposit stays valid for 12 months. · terms
Stage 2: deposit online, the rest quoted by the centre
122 € deposit online, VAT included (100 € + VAT): development of the Stage 2 file for your engine starts straight away
Online you pay only the deposit. The rest (writing the ECU, mechanical work and parts, for example the downpipe) is quoted by the centre, which calls you the same day.
What happens next
- You pay the deposit online: development of the file starts straight away.
- The centre calls you the same day and checks how your car is set up.
- It sends you the written quote: parts, fitting and installation of the file, item by item.
- You book the appointment whenever you like, within 12 months, and pay the rest at the centre.
What a Stage 2 usually needs
It depends on the engine, which is why the workshop part is quoted: the centre looks at your car before writing down a figure. Typically:
- turbo petrol: almost always a sports downpipe, often a larger intercooler;
- diesel: usually a more efficient intercooler and, where needed, a downpipe;
- clutch: assessed when torque rises a lot or it is already worn;
- if the car already has some of these parts, the quote is lower.
Why pay the deposit now
- Development starts straight away: the job is open and the centre already has your code. On the day of the appointment the final file arrives within 1-2 hours of reading the ECU.
- The deposit is fixed: 122 €, already paid. The centre’s quote covers only the rest (workshop and parts).
- You have 12 months to book the appointment: get the parts ready calmly.
- Lifetime warranty on the file; the workshop job carries the 2-year legal warranty.
- 31 MasterTuning centres, 27 in Italy: choose the nearest.
The deposit is non-refundable: development of the file starts straight away at your request. terms
Power Graph · Stage 1
Seat Altea FreeTrack 2.0 TDI 170hp: da 170 a 205HP
Values for Stage 1 (change the stage from the control above)
Remapping Seat Altea FreeTrack
MasterTuning develops remapping for Seat. La Seat Altea FreeTrack 2.0 TDI 170hp può passare da 170 HP a 205 HP con un incremento di 35 HP.
The development of each remap is customized by MasterTuning.
- 100% customised files with lifetime warranty
- Reference values for Stage 1: the file is developed on your vehicle and checked in the workshop
- Best performance, within safety margins
- Reduced fuel consumption
ECU Remapping Details Seat Altea FreeTrack 2.0 TDI 170hp
The Seat Altea FreeTrack 2.0 TDI 170hp is equipped with a diesel engine that produces 170 HP and 350 Nm of torque in its factory configuration. With MasterTuning's professional ECU remapping, this Seat can achieve 205 HP (+21%) and 430 Nm (+23%).
Our Stage 1 tuning for the Altea FreeTrack 2007 - 2009 delivers an impressive gain of +35 HP and +80 Nm, optimizing the diesel engine's performance while maintaining reliability and staying within safe parameters.
The engine code BMN identifies this specific powerplant configuration. The Siemens/Continental PPD1.2 ECU is professionally recalibrated to unlock hidden potential while preserving engine longevity.
As a diesel engine, this Seat responds exceptionally well to ECU tuning. Owners typically report improved throttle response, smoother power delivery, and in many cases, better fuel efficiency under normal driving conditions.
Technical Specifications — Seat Altea FreeTrack 2.0 TDI 170hp
Factory technical data for the Seat Altea FreeTrack 2.0 TDI 170hp (2007 - 2009), used by MasterTuning engineers to develop a remap tailored to this specific powerplant. Figures shown are reference values for Stage 1; the file is developed on your vehicle and checked in the workshop.
| Engine code | BMN |
|---|---|
| ECU / Control unit | Siemens/Continental PPD1.2 |
| Fuel | Diesel |
| Compression ratio | 18.0 |
| Bore × stroke | 81.0 X 95.5 mm |
| Stock power | 170 HP · 350 Nm |
| Remapped power (Stage 1) | 205 HP (+35) · 430 Nm (+80) |
Don't want to touch the ECU?
Rapid Dimsport add-on modules connect to the engine sensors with original connectors: they fit in a few hours and come off without a trace, leaving the factory software untouched. Useful on a leased car, one still under warranty or one you plan to sell soon. Check which ones fit your Seat Altea FreeTrack.
Frequently Asked Questions - Seat Altea FreeTrack
How much power can I gain from remapping my Seat Altea FreeTrack?
With MasterTuning Stage 1, your Seat Altea FreeTrack 2.0 TDI 170hp can gain +35 HP (from 170 to 205 HP) and +80 Nm of torque. This represents a 21% increase in power.
Which ECU does the Seat Altea FreeTrack 2.0 TDI 170hp use?
The Seat Altea FreeTrack 2.0 TDI 170hp uses the Siemens/Continental PPD1.2 engine control unit. MasterTuning recalibrates this ECU for Stage 1 and Stage 2.
What is the engine code of the Seat Altea FreeTrack 2.0 TDI 170hp?
The engine code of the Seat Altea FreeTrack 2.0 TDI 170hp is BMN. You can find it in the vehicle documents or on the engine plate.
Is ECU remapping safe for the Seat Altea FreeTrack engine?
Yes, MasterTuning's remapping for the Seat Altea FreeTrack 2.0 TDI 170hp is developed within safe parameters. Each file is developed on your vehicle, checked in the workshop and stays within the mechanical limits of the BMN engine.
Is the Seat ECU remapping reversible?
Absolutely. The original factory calibration of your Seat Altea FreeTrack is always backed up before remapping. The process is 100% reversible at any time.
Will remapping affect my Seat warranty?
ECU remapping may affect your manufacturer warranty. We recommend checking your specific warranty terms. Many of our customers choose to remap after the warranty period or accept this trade-off for the significant performance gains.
Other Remaps You Might Like
Other Engines Seat Altea FreeTrack 2007 - 2009
Similar Power Seat
Book your remap or ask for a quote
Online you pay only the deposit; the rest is paid at the centre you choose when the job is done (for Stage 2 on quote: ECU writing, mechanical work and parts).
Online you pay only the deposit (122 €), deducted from the total. The balance (327 €) is paid at the centre you choose when the job is done.
Stage 2 is quoted on request: write to us and we will reply with price and timing.
Online you pay only the deposit. The rest (writing the ECU, mechanical work and parts, for example the downpipe) is quoted by the centre, which calls you the same day.
Request Quote on WhatsAppYour data is safe. No spam, just your quote.
-15% on Stage 1 if you ask for the quote now (valid 7 days)